Product Lines
     Apex Tools
    Blind Bolt Mandrels
     Clecos
    Countersink
    Drills
     Hi-Lok Tools
     Hi-Torque Bits
     Nut Plate Jigs
     Reamers
     Rivet Sets
    Roller Ratchets    
 Contact Omega

  • (800)888-4005

   • (818)264-7970

  Fax

  • (818) 264-1414

  Email

  ask@omegatec.com


Industry News
Aerospace Industry Profits Up in 2005
On-going efforts to control cost increases, are expected to translate into a 77 per cent increase in profits for Canada's aerospace industry in 2005.

Colorado is Hub for Hush-Hush Aerospace Industry
Call it the Area 51 of the Denver region.

A Giant Step For Aerospace Industry
In the midst of ongoing extensive air power enhancements in China and Japan, the Korean aerospace industry took a giant step yesterday.

TECH TIP #102: THREADING TAP HOLDERS
Selecting the right tap holder depends upon the equipment to be used for tapping..

 
 
 

 

Omegatec Reamers


Throughout the world, Reamers are used in virtually all manufacturing process to improve the straightness and finish of drilled holes, to enlarge drilled holes, and to produce highly accruate inside diameters of holes. Omega's reamers are precision ground from the finest High Speed and Cobalt Tool Steels to insure consistantly accurate results. While there are many variations in shanks and flute configurations, most reamers are either Non-Piloted (The cutting flutes extend to the tip of the Reamer) or they are Piloted. Piloted Reamers are similar to Non-Piloted Reamers except that they have a Reduced Diameter, Non-Cutting Tip that allow the reamer to be positioned in an existing hole. Piloted reamers are usually used to enlarge existing holes. The Pilot acts as a guide, and insures concentricity with the original hole.

Reamers Product Categories
Cobalt Chucking Reamers, Straight Shank, Straight Flute
Cobalt Piloted Chucking Reamers
Cobalt Piloted Threaded Shank, LONG
Cobalt Piloted Threaded Shank, SHORT
Cobalt Piloted Threaded Shank, STUB
Cobalt Threaded Shank Reamers, LONG
Cobalt Threaded Shank Reamers, SHORT
Cobalt Threaded Shank Reamers, STUB
HSS Chucking Reamers, Straight Shank, Straight Flute
HSS Piloted Chucking Reamers
HSS Piloted Threaded Shank, LONG
HSS Piloted Threaded Shank, SHORT
HSS Piloted Threaded Shank, STUB
HSS Threaded Shank Reamers, LONG
HSS Threaded Shank Reamers, SHORT
HSS Threaded Shank Reamers, STUB

 
 

Popular Tools

• Drill Bits
• Roller Ratchet
• Sockets
• Adapters
• Extenders
• Bit Holders
• Tri-Wing
View Cart      Place A Quote Or Tooling Request     Home

Copyright ©2006 Omega Technologies Inc. All rights reserved